3x3x3 LED CUBE

Hey Guys, here we are using 27 Yellow LED’s, a Arduino Uno Microcontroller, shift reistors, 12 resistors and 3 NPN transistors to make 3*3*3 LED Cube.

Please support us on YouTube also. Like Share and Subscribe to our channel : https://youtube.com/c/RatnasRoboLab

Total Materials

  • 27 Yellow LED’s :
  • 12 resistors :
  • 3 NPN transistors :
  • Arduino Uno :
  • Shift resistor IC :
  • Brass Wires :

Assembling

The construction of LED CUBE is very simple. At first we have to connect 9 cathodes with each other in each plane of the 9 LED’s. Same thing we have to do with other planes with other 9 LED’s. Finally connect the anodes in each plane respectively.

Connect Resistors and Transistors

We have 9 columns and 3 rows. Each column is connected with 150 ohm resistor and each row is connected with 1K ohm resistor using NPN Transistors.

Connect Shift Resistors and Arduino

Now we have to control 12 outputs (9 columns and 3 rows) so we need 12 wires through Arduino but instead of that we are using a shift resistor (74HC595) IC and we can control 12 outputs using only 3 inputs (Data, Clock and Latch) of shift resistors. Not only 12 outputs, we can control any no of outputs using only 3 pins using shift resistors.

If you liked this article, then please subscribe to our YouTube Channel. You can also find us on InstagramFacebook and Twitter.

READ – CONNECT – BOOST – CREATE

Related :

Follow :